Heat Resistant Steel Cord Conveyor Belt

Ideal for cement, metallurgy, steel mills, and thermal power industries, YUFENG Heat Resistant Steel Cord Conveyor Belt ensures reliable long-distance conveying of hot bulk materials. Backed by factory testing and practical project experience, YUFENG provides customized and cost-effective high-temperature conveyor belt solutions for global industrial customers.

Product Positioning & Practical Application Scenarios

1. High-Temperature Resistant Conveying Solution Definition

YUFENG Conveyor Belt is a professional high-temperature resistant heavy-duty conveying product, exclusively designed for industrial scenarios with continuous high-temperature material impact and long-term heat radiation.

Ordinary industrial conveyor belts are only suitable for normal-temperature material conveying. When facing long-term hot material contact and high-temperature environmental heat accumulation, ordinary belts are prone to rubber aging, surface cracking, layered peeling and rapid strength loss, leading to frequent shutdown replacement and affecting continuous production efficiency.

2. Typical Industrial Application Scenarios

This Heat Resistant Steel Cord Conveyor Belt supplied by YUFENG factory breaks the temperature resistance limit of ordinary conveyor belts.

It takes high-temperature stability and long-life operation as the core design goals, and is widely applicable to mature high-heat industrial scenarios.

Typical industries include cement plant clinker conveying, metallurgical sinter ore transportation, steel plant hot residue conveying, thermal power plant high-temperature coal material and ash conveying, and chemical high-temperature granular material handling.

It is the stable preferred conveying equipment for long-distance and high-load high-temperature bulk material production lines.

Field Usage Method & Operation Instructions

1. Installation & Daily Operation Requirements

In actual industrial operation, the YUFENG Conveyor Belt is installed and used consistent with standard steel cord conveyor belts, with no special complex modification required for equipment.

It is suitable for fixed long-distance conveyor lines and large-capacity trough-type conveying equipment.

During operation, it is mainly used for continuous conveying of high-temperature bulk, granular and block materials, avoiding long-term static accumulation of overheated materials on the belt surface to reduce local heat concentration.

2. High-Temperature Continuous Conveying Performance

For daily matching use, it is recommended to support conventional heat-resistant rollers and stable tensioning equipment to ensure uniform belt operation.

This product is suitable for 24-hour continuous cyclic conveying in high-heat workshops and open-air high-temperature environments.

Compared with ordinary heat-resistant fabric belts, YUFENG heat-resistant steel cord belts have stronger structural stability during long-term high-temperature operation, not easy to deviate or deform, and can adapt to high-frequency and large-volume industrial production rhythm, greatly reducing the frequency of manual inspection and equipment maintenance.

Factory Raw Material Configuration & Professional Craftsmanship

1. Heat-Resistant Rubber Compound Formula

As a professional Heat Resistant Steel Cord Conveyor Belt factory, we strictly control raw material selection and production processes to ensure real and stable high-temperature resistance.

The upper and lower covering rubber adopts modified heat-resistant rubber compound blended with special heat stabilizers and anti-aging additives, which effectively inhibits rubber molecular aging under long-term high-temperature environment, avoiding softening and stickiness.

The formula is optimized for industrial high-heat scenarios, with stable heat resistance and excellent anti-aging performance.

2. Integrated Steel Cord Vulcanization Structure

The internal tensile framework adopts high-strength galvanized steel cords arranged in parallel and evenly.

Through secondary constant-temperature integral vulcanization process, the steel cord and heat-resistant rubber are closely combined as a whole, with strong bonding force, no degumming and no layered separation under long-term high-temperature heat expansion and cold contraction.

3. Standardized Production Process Control

Different from peer products that only add simple heat-resistant coatings on the surface, YUFENG integrates heat-resistant components into the rubber matrix, realizing overall and lasting high-temperature resistance, not limited to superficial protection.

Each production process is implemented in accordance with industrial standards, with standardized process parameters and stable batch consistency.

Verifiable Test Data & Shooting Resources

1. Factory Performance Test Data

All YUFENG Conveyor Belt products pass independent factory physical performance tests, with true and verifiable data, supporting third-party sampling inspection.

The core measured performance data is as follows: long-term sustainable working temperature 180℃, instantaneous bearing peak temperature up to 220℃; after 1000 hours of continuous high-temperature aging test at 180℃, the belt tensile strength retention rate is higher than 88%, no cracking or peeling on the rubber surface; the permanent elongation under rated load is ≤0.2%, maintaining stable structural size.

2. Real Factory Verification Materials

In terms of wear resistance and heat stability, after long-term high-temperature operation simulation test, the surface uniform wear loss is far lower than the industry standard value.

The factory has complete test equipment, including high-temperature aging test chamber, tensile testing machine and impact resistance testing equipment.

We can provide real factory test videos, product finished shooting pictures, raw material inspection pictures and production workshop operation pictures for customer verification, supporting true and credible product performance display.

Real Project Cases (Batch & Customized)

1. Cement Plant Clinker Conveying Project

Our YUFENG factory provided batch standard Heat Resistant Steel Cord Conveyor Belt for a large domestic cement production base, used for high-temperature clinker long-distance conveying line.

The on-site material temperature is stable at 150℃-180℃, with 24-hour continuous operation.

After 12 months of on-site operation verification, the belt body has no aging cracking, no delamination and no obvious stretching deformation, and the operation is stable throughout the cycle.

The customer feedback that the service life is significantly longer than the previous ordinary heat-resistant belts, and the downtime maintenance frequency is greatly reduced.

2. Metallurgical High-Temperature Sinter Project

For a Southeast Asian metallurgical enterprise’s sinter ore high-temperature conveying project, we customized widened and enhanced heat-resistant grade YUFENG Conveyor Belt according to on-site working conditions.

Facing instantaneous high temperature impact of 200℃-220℃ and heavy-load material impact, the customized product maintains stable structural performance, effectively solves the problem of frequent damage and short service life of local matching belts, and has been operating stably for more than 10 months, winning stable long-term cooperative orders from customers.

Core Advantages & Peer Comparison

1. Solving Common Heat-Resistant Conveyor Belt Problems

In view of the common pain points of heat-resistant conveyor belts on the market, YUFENG’s products have obvious practical advantages:

Ordinary peer heat-resistant steel cord belts mostly adopt ordinary rubber surface treatment, which is easy to have surface aging, bulging and local peeling under long-term high temperature, with fast performance attenuation and short service life.

Some low-cost products have unstable steel cord bonding performance, prone to internal degumming under high-temperature alternating environment, leading to belt body bulging and deviation.

2. Higher High-Temperature Stability & Service Life

Our Conveyor Belt solves the above industry pain points in a targeted manner.

The integrated heat-resistant rubber matrix ensures overall uniform heat resistance, no local failure; the integral vulcanization steel cord structure maintains stable tensile performance under high temperature, avoiding degumming and deformation.

Compared with peers, our products have higher high-temperature strength retention rate, slower aging speed and longer actual service life in the same working condition.

It can effectively reduce customer’s replacement cost and production shutdown loss, with higher comprehensive cost performance and more reliable on-site adaptability.

Complete Product Specification Parameters

Why Choose YUFENG Factory Supply

1. Professional Conveyor Belt Manufacturer

As a direct Heat Resistant Steel Cord Conveyor Belt manufacturer and supplier, YUFENG has independent production workshops and complete high-temperature testing equipment, with no middleman markup.

We focus on the R&D and production of high-temperature resistant conveyor belts for many years, and fully understand the actual pain points of high-heat industrial conveying.

2. Full-Process Quality Control & Project Verification

Different from trading companies that cannot control product quality, we realize full-process quality control from raw material proportioning, vulcanization molding to finished product testing.

All products are based on actual working condition verification, with true test data and real project cases, abandoning empty exaggerated publicity.

3. Customized Solutions & Technical Support

We can provide targeted product matching according to customer’s on-site temperature, conveying distance and load parameters, and provide stable after-sales technical support, helping customers solve high-temperature conveying failures and high replacement costs.

FAQ

Q1: How to select the correct heat resistant steel cord belt model according to on-site working conditions?

A1: As a professional Heat Resistant Steel Cord Conveyor Belt manufacturer, YUFENG recommends model selection based on three core on-site parameters: actual material temperature, conveying distance and hourly throughput. For stable 120℃–180℃ long-term hot material conveying in cement and power plants, standard YUFENG heat-resistant steel cord belts are fully applicable. 

For scenarios with frequent instantaneous high-temperature impact above 200℃ or long-distance heavy-load operation, we suggest upgrading the rubber formula and steel cord tensile grade to avoid premature aging and deformation. We provide free one-on-one model matching service according to customers’ site data, ensuring no over-specification or insufficient performance.

Q2: Why do many heat-resistant belts fail quickly in actual high-temperature working conditions?

A2: Most low-cost heat-resistant conveyor belts on the market have two common defects: single surface heat-resistant coating and unstable bonding process. The surface heat-resistant layer will wear out after a period of operation, leading to rapid loss of high-temperature resistance. In addition, ordinary vulcanization technology cannot resist thermal expansion and contraction under long-term high temperature, easily causing internal degumming, bulging and layer separation. 

YUFENG Conveyor Belt adopts integral heat-resistant rubber matrix and one-piece steel cord vulcanization technology. The high-temperature resistance is overall and lasting, not limited to surface protection, which fundamentally solves the problem of short service life of ordinary heat-resistant belts in industrial high-heat scenarios.

Q3: What is your factory’s delivery and after-sales guarantee for high-temperature resistant belts?

A3: YUFENG, as a direct Conveyor Belt factory and supplier, has sufficient stock for conventional specifications and can deliver within 15 working days. For customized special heat-resistant grades and non-standard sizes, we arrange independent production and complete delivery within 15-35 working days. 

All finished products are accompanied by factory test reports and complete inspection data. During the warranty period, if there are non-human damage quality problems under normal operating conditions, we provide targeted technical guidance and after-sales solutions. We support on-site problem analysis for large engineering projects to ensure long-term stable operation of customer conveying lines.

Contact Us

If you are looking for a reliable YUFENG Heat Resistant Steel Cord Conveyor Belt manufacturer and supplier for high-temperature industrial conveying projects, please contact us to obtain free samples, real test data and factory quotation!